Blind Rivet Tools
Blind Rivet Tools - Rivet Guns - Pop® Rivet Guns
Blind Rivet Hand Tools
From blind rivet tools to rivet nut tools, you can count on us to provide you with quality, cost effective hand rivet tools.
MODEL TO-GH-39005 Blind Rivet Tool
Call to order!
Swivel Head Hand Riveter
The swivel head hand-held rivet tool features a patented positive-ratchet locking feature which will allow the swivel head section of the tool to turn 360° and hold in place in any of the forty plus positions. The high strength steel body and cast aluminum head complement this new design in a swivel head riveting tool. This tool sets up to 3/16" steel rivets.
Weight: 1.2 lbs.
MODEL TO-VHR-1 Blind Rivet Tool
Call to order!
Blind Riveter
Sets: 3/32"-3/16" Diameter Steel
Durable all steel construction
MODEL HR-730 Blind Rivet Tool
Call to order!
Blind Riveter
Sets up to 1/8- 1/4" diameter rivets in all materials.
Comes with all nose tips.
MODEL TO-GH-39031 Blind Rivet Tool
Call to order!
Blind Riveter
The TO-GH-39031 is the most versatile and powerful hand riveter, taking the hard work out of setting large diameter blind rivets. Its extra-long handles provide excellent leverage and permit working a foot beyond natural reach. Other features include a patented bearing design, self-adjusting two-piece jaws and single-unit body construction with a steel insert to provide stronger threads for the nosepieces included. In addition the TO-GH-39031 features a double-gear reduction system with easily sets from 1/8" to 1/4" diameter rivets in all alloys. And a one-piece collet case eliminates the need to adjust the tool when changing rivet diameters. The TO-GH-39031 comes with 5/32", 3/16" and 1/4" nosepieces which are stored in the body.
Weight: 3.75 lbs.
Blind Rivet Kits with Tools
Call to order!
Blind Rivet Kits with Tools
Variety of Blind Rivet Kits with tools available - Call for details or visit Our Online Store at RivetsOnline.com
Power Blind Rivet Tools
From our pneumatic rivet nut tools to blind rivet nut tools, you can count on us to provide you with quality, low cost power rivet tools.
MODEL MP-3V Blind Rivet Tool
Call to order!
Blind Rivet Power Tools
Capacity: 3/32" – 3/16" All Materials
Pulling force: 1,800 lbs.
Stroke: .787"
Recommended airline pressure: 60-95 psi
Weight: 2.9 lbs.
This newly designed light-duty air/hydraulic riveter is Ergonomically designed with the professional in mind. The Light weight, well balanced MP-3V includes Vacuum system and design to maximize stroke and pull force with a 3 jaw setup to get the job done. Direct connect or use the attached swivel for operator convenience. Each tool is supplied with nosepieces to set 3/32”- 3/16” rivets in all alloys. Includes adjustment service wrenches, hydraulic fluid, fluid applicator, spare jaws and a removable swivel air connection line with air off/on valve built in. An adjustable Vacuum System control located inside the mandrel collection bottle allows you control the force of the air needed to hold the rivet in place or you may operate with the vacuum system turned off.
MODEL MP-4V Blind Rivet Tool
Call to order!
Blind Rivet Power Tools
Capacity: 5/32" – 1/4" Structural in all alloys
Pulling force: 3,420 lbs.
Stroke: 1.023"
Recommended airline pressure: 70-95 psi
Weight: 3.7 lbs.
This newly designed heavy-duty air/hydraulic Vacuum System riveter comes supplied with everything you need to start riveting right out of the box. Each tool is supplied with a 3 piece jaw set and nosepieces to set 5/32”-1/4” open end blind rivets in all alloys. The supplied standard 3/16” and 1/4” nosepieces can also be used for structural rivets. A 1/4” nosepiece for external locking structural rivets is included. Spent mandrel are easily removed from the twist open style collection bottle. Adjustment service wrenches, hydraulic fluid, fluid applicator, spare jaws and a removable swivel air connection line with an air off/on valve built in are included. The adjustable Vacuum System control knob located on the upper left side of handle allows you to control the force of the vacuum air needed to hold the rivet in place. It can be also operated with the vacuum system in the off position.
MODEL TO-GH-302E Blind Rivet Tool
SPECIAL!
Call to order!
Blind Rivet Tools
- Work Capacity: 3/32" to 3/16" diameter rivets in all alloys. And 1/4" diameter open-end rivets in aluminum /steel combination.
- Weight: 4 lbs.
This durable riveter with its fully adjustable vacuum system holds the rivet in the nosepiece, allowing the operator to rivet at any angle with one hand free. The vacuum system also automatically collects the spent mandrel into a collection bottle. This creates a cleaner and safer work environment by preventing spent mandrels from falling to the floor or work surface. This tool can easily install 3/32" to 3/16" diameter rivets in all alloys. And 1/4" diameter open-end rivets in aluminum /steel combination. A swivel air inlet for increased mobility when working is also included along with a push button trigger and molded frame which provides the operator with the maximum comfort using minimal effort.
The Recommended airline pressure is 85-95 psi.
MODEL TO-GH-304E Blind Rivet Tool
Call to order!
Blind Rivet Tools
- Work Capacity: 3/16" and 1/4"
- Weight: 5.25 lbs.
This is our most powerful air/hydraulic riveter, with its fully enclosed vacuum system that holds the rivet in the nosepiece, allowing the operator to rivet with one hand free. The vacuum system automatically collects the spent mandrel into a bottle, creating a cleaner, safer work environment by preventing spent mandrels from falling to the floor. A traction pulling power of 4200 lbs. Allows this tool to easily set structural blind rivets. Its long 7/8" stroke enables the tool to set most rivets in one pull. In addition to the nosepieces for structural rivets, nosepieces to install 3/16" and 1/4" standard rivets are also included along with a push button trigger and molded frame which provides the operator with maximum comfort using minimal effort. Recommended airline pressure is 85-95psi.
MODEL TO-GH-ACCUBIRD Blind Rivet Tool
Call to order!
Blind Rivet Tools
- Work Capacity: 3/32" to 3/16" Blind rivets
- Weight: 4.8 lbs.
- Power Pack: 12volt, Rechargeable NiCad
Optional retaining nosepieces hold rivet securely in the tool nose prior to setting rivet. Extra length nosepieces are available. The TO-GH-7250061 offers a larger .79" stroke to handle most sizes and has an traction power of 1,900 lbs. While allowing free movement with out any cords.
MODEL TO-GH-POWERBIRD Blind Rivet Tool
Call to order!
Blind Rivet Tools
- Work Capacity: 3/16" and 1/4" and 9/32" BT
- Weight: 4.8 lbs.
- Power Pack: 12volt, Rechargeable NiCad
The TO-GH-7240058 offers a larger .79" stroke to handle most sizes and has an traction power of 2,900 lbs. While allowing free movement with out any cords. Download Manual PDF »
GAV Riveting System
GESIPA’s GAV 8000 sets the standard for industrial grade automatic feed blind riveting systems. The GAV 8000 system is comprised of a console housing the pneumatic/hydraulic power unit, electronic control unit and vibratory rivet feeder. Rivets are blow-fed through the 12 foot umbilical hose to the tool head. Tool heads are available in Pistols In-line/Robotic and Inverted Pistol configurations. The GAV’s cycle rate is up to 45 rivets per minute.
- Weight: 220
- Volume Spent: Mandrel Container Up to 5,500 pieces (3.5 L)
- Volume Rivet: Feed Bowl. Up to 3,500 pieces (4.75 L)
- Console Cabinetry: Fully enclosed, rugged steel construction, noise insulated, dustproof