- Rivet Tools
-
Rivets
- Solid Rivets
-
Solid Aluminum Rivets
- Round Head Solid Aluminum Rivets
- Flat Head Solid Aluminum Rivets
- 100 Deg. Countersunk Head Solid Aluminum Rivets
- 78 Deg. Countersunk Head Aluminum Solid Rivets
- Universal Head Aluminum Solid Rivets
- Brazier Head Solid Aluminum Rivets
- Modified Brazier Head Solid Aluminum Rivets
- Mushroom Head Solid Aluminum Rivets
- Solid Aluminum Rivet Data
- Blind Rivets
- Semitubular Rivets
- Brake & Clutch Rivets
- Split Rivets
- Aluminum Drive Rivets
- Steel Drive Rivets
- Copper Brake Band Rivets
- MS & AN Rivets
- Compression / Speed Rivets
- Tinner Rivets
- Copper Belt Rivets & Burrs
- Section Rivets
- Rivet Nuts / Threaded Inserts
- Hex Head Cap Screws
- Screws
- Lockbolts
- Binder Posts & Screws
- Burrs & Washers
- Clevis Pins
- Hairpin Cotters
- Cotter Pins
- Brass Escutcheon Pins
- Drive Screws
- Brass Eyelets
- Rivet Kits / Rivet Nut Kits
- Thread Repair Kits - Helical Inserts
- Cleco Fasteners/Temporary Rivets
- Keysert Inserts
- Key Sert Range Kits
- Vibratite Threadlockers, Adhesives, Sealants & More
- Vibratite VC-3 Threadmate
- Threadlocker
- Thread Sealant
- Anaerobic Retaining Compounds
- Anaerobic Liquid Gasketing
- Cyanoacrylates (SuperGlue)
- Anti-Seize Compounds
- Light Cure Adhesives
- Structural Adhesives
- Epoxies
- Primers, Accelerators & Activators
- Urethanes
- DriveGrip
- Pre-applied Fasteners
- Value Fastener Screws
Large Solid Round Head Rivets (1/2" inch over diameter)
Jay Cee Sales & Rivet has a large in-stock supply of large solid round head rivets. Looking for flat head or countersunk rivets? use the links below.
These Large Solid Round Head Rivets are available in: STEEL, STAINLESS STEEL, BRASS, COPPER, MONEL, INCONEL
For Aluminum Head Styles, CLICK HERE
Solid Round Head Rivet Specifications
| D | A | H | R | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Shank Diameter | Head Diameter | Head Height | Head Radius | ||||||
| Nominal Size | Max | Min | Basic | Max | Min | Max | Min (Basic) | ||
| 1/2 | 0.500 | 0.520 | 0.478 | 0.875 | 0.938 | 0.844 | 0.406 | 0.375 | 0.443 |
| 5/8 | 0.625 | 0.655 | 0.600 | 1.094 | 1.157 | 1.063 | 0.500 | 0.469 | 0.553 |
| 3/4 | 0.750 | 0.780 | 0.725 | 1.312 | 1.390 | 1.281 | 0.593 | 0.562 | 0.664 |
| 7/8 | 0.875 | 0.905 | 0.850 | 1.531 | 1.609 | 1.500 | 0.687 | 0.656 | 0.775 |
| 1 | 1.000 | 1.030 | 0.975 | 1.750 | 1.828 | 1.719 | 0.781 | 0.750 | 0.885 |
| 1-1/8 | 1.125 | 1.160 | 1.098 | 1.969 | 2.063 | 1.938 | 0.891 | 0.844 | 0.996 |
| 1-1/4 | 1.250 | 1.285 | 1.223 | 2.188 | 2.282 | 2.157 | 0.985 | 0.938 | 1.107 |
| 1-3/8 | 1.375 | 1.415 | 1.345 | 2.406 | 2.500 | 2.375 | 1.078 | 1.031 | 1.217 |
| 1-1/2 | 1.500 | 1.540 | 1.470 | 2.625 | 2.719 | 2.594 | 1.188 | 1.125 | 1.328 |
| 1-5/8 | 1.625 | 1.665 | 1.588 | 2.844 | 2.938 | 2.813 | 1.282 | 1.219 | 1.439 |
Notes: 1. Approximate proportions of
manufactured shape.
A = 1.75 x D
H = 0.75 x D
G = 0.885 x D
Note: Not responsible for errors in data tables. Please check with our sales department to confirm specs.
Thanks for signing up!