Small Solid Countersunk Head Rivets (under 7/16" inch diameter)

Jay Cee Sales & Rivet has a large in-stock supply of small solid and countersunk head rivets. Call us today for all of your rivet and special fastener needs.
These Solid Countersunk Head Rivets are available in: STEEL, STAINLESS STEEL, BRASS, COPPER, MONEL, INCONEL
For Aluminum Head Styles, CLICK HERE
Countersunk Head Solid Rivet Specifications

Normal Size or Basic Shank Diameter | D | A | H | |||
---|---|---|---|---|---|---|
Shank Diameter | Head Diameter | Head Height | ||||
Max | Min | Max | Min | Ref | ||
1/16 | 0.062 | 0.064 | 0.059 | 0.118 | 0.110 | 0.027 |
3/32 | 0.094 | 0.096 | 0.090 | 0.176 | 0.163 | 0.040 |
1/8 | 0.125 | 0.127 | 0.121 | 0.235 | 0.217 | 0.053 |
5/32 | 0.156 | 0.158 | 0.152 | 0.293 | 0.272 | 0.066 |
3/16 | 0.188 | 0.191 | 0.182 | 0.351 | 0.326 | 0.079 |
7/32 | 0.219 | 0.222 | 0.213 | 0.413 | 0.384 | 0.094 |
1/4 | 0.250 | 0.253 | 0.244 | 0.469 | 0.437 | 0.106 |
9/32 | 0.281 | 0.285 | 0.273 | 0.528 | 0.491 | 0.119 |
5/16 | 0.312 | 0.316 | 0.304 | 0.588 | 0.547 | 0.133 |
11/32 | 0.344 | 0.348 | 0.336 | 0.646 | 0.602 | 0.146 |
3/8 | 0.375 | 0.380 | 0.365 | 0.704 | 0.656 | 0.159 |
13/32 | 0.406 | 0.411 | 0.396 | 0.763 | 0.710 | 0.172 |
7/16 | 0.438 | 0.443 | 0.428 | 0.823 | 0.765 | 0.186 |
Notes:
1. Calculated on basic diameter of rivet and 92 deg included angle extended to sharp corner.
2. Head height (H) is given for reference purposes only. Variations in this dimension are controlled by the diameters (A) and (D) and the included angle of the head.
3. Approximate proportions:
A=1.850xD
H=0.425xD
4. Length tolerance for rivets shall be +/- .016 in.