- Rivet Tools
-
Rivets
- Solid Rivets
-
Solid Aluminum Rivets
- Round Head Solid Aluminum Rivets
- Flat Head Solid Aluminum Rivets
- 100 Deg. Countersunk Head Solid Aluminum Rivets
- 78 Deg. Countersunk Head Aluminum Solid Rivets
- Universal Head Aluminum Solid Rivets
- Brazier Head Solid Aluminum Rivets
- Modified Brazier Head Solid Aluminum Rivets
- Mushroom Head Solid Aluminum Rivets
- Solid Aluminum Rivet Data
- Blind Rivets
- Semitubular Rivets
- Brake & Clutch Rivets
- Split Rivets
- Aluminum Drive Rivets
- Steel Drive Rivets
- Copper Brake Band Rivets
- MS & AN Rivets
- Compression / Speed Rivets
- Tinner Rivets
- Copper Belt Rivets & Burrs
- Section Rivets
- Rivet Nuts / Threaded Inserts
- Hex Head Cap Screws
- Screws
- Lockbolts
- Binder Posts & Screws
- Burrs & Washers
- Clevis Pins
- Hairpin Cotters
- Cotter Pins
- Brass Escutcheon Pins
- Drive Screws
- Brass Eyelets
- Rivet Kits / Rivet Nut Kits
- Thread Repair Kits - Helical Inserts
- Cleco Fasteners/Temporary Rivets
- Keysert Inserts
- Key Sert Range Kits
- Vibratite Threadlockers, Adhesives, Sealants & More
- Vibratite VC-3 Threadmate
- Threadlocker
- Thread Sealant
- Anaerobic Retaining Compounds
- Anaerobic Liquid Gasketing
- Cyanoacrylates (SuperGlue)
- Anti-Seize Compounds
- Light Cure Adhesives
- Structural Adhesives
- Epoxies
- Primers, Accelerators & Activators
- Urethanes
- DriveGrip
- Pre-applied Fasteners
- Value Fastener Screws
Large Countersunk Head Solid Rivets (1/2" inch over diameter)
Jay Cee Sales & Rivet has a large in-stock supply of large solid round head rivets. Looking for round head or flat head rivets? Use the links below for more information.
These Large Countersunk Head Solid Rivets are available in: STEEL, STAINLESS STEEL, BRASS, COPPER, MONEL, INCONEL
For Aluminum Head Styles, CLICK HERE
Countersunk Head Rivet Specifications
| Nominal Size or Basic Shank Diameter | D | A | H | |||
|---|---|---|---|---|---|---|
| Shank Diameter | Head Diameter | Head Height | ||||
| MAX | MIN | MAX | MIN | REF | ||
| 1/2 | 0.500 | 0.520 | 0.478 | 0.936 | 0.872 | 0.260 |
| 5/8 | 0.625 | 0.655 | 0.600 | 1.194 | 1.112 | 0.339 |
| 3/4 | 0.750 | 0.780 | 0.725 | 1.421 | 1.322 | 0.400 |
| 7/8 | 0.875 | 0.905 | 0.850 | 1.647 | 1.532 | 0.460 |
| 1 | 1.000 | 1.030 | 0.975 | 1.873 | 1.745 | 0.520 |
| 1-1/8 | 1.125 | 1.160 | 1.098 | 2.114 | 1.973 | 0.589 |
| 1-1/4 | 1.250 | 1.285 | 1.223 | 2.340 | 2.199 | 0.650 |
| 1-3/8 | 1.375 | 1.415 | 1.345 | 2.567 | 2.426 | 0.710 |
| 1-1/2 | 1.500 | 1.540 | 1.470 | 2.793 | 2.652 | 0.771 |
| 1-5/8 | 1.625 | 1.665 | 1.588 | 3.019 | 2.878 | 0.831 |
| 1-3/4 | 1.750 | 1.790 | 1.713 | 3.262 | 3.121 | 0.901 |
NOTES:
1. Approximate proportions. A - 1.81 x D; H - 1.192 ((MAX A-D)/2)
2. Sharp edged calculated on basic diameter of rivet and 80-degree included angle extended to a sharp corner.
3. Rounded or flat edged irregular shaped head since the heads of these rivets are not machined or trimmed, the circumference may be somewhat irregular and edges rounded or flat.
4. Head height (H) is given for reference purposes only. Variations in this dimension are controlled by the diameters (A) and (D) and the included angle of head.
Note: Not responsible for errors in data tables. Please check with our sales department to confirm specs.