- Rivet Tools
-
Rivets
- Solid Rivets
-
Solid Aluminum Rivets
- Round Head Solid Aluminum Rivets
- Flat Head Solid Aluminum Rivets
- 100 Deg. Countersunk Head Solid Aluminum Rivets
- 78 Deg. Countersunk Head Aluminum Solid Rivets
- Universal Head Aluminum Solid Rivets
- Brazier Head Solid Aluminum Rivets
- Modified Brazier Head Solid Aluminum Rivets
- Mushroom Head Solid Aluminum Rivets
- Solid Aluminum Rivet Data
- Blind Rivets
- Semitubular Rivets
- Brake & Clutch Rivets
- Split Rivets
- Aluminum Drive Rivets
- Steel Drive Rivets
- Copper Brake Band Rivets
- MS & AN Rivets
- Compression / Speed Rivets
- Tinner Rivets
- Copper Belt Rivets & Burrs
- Section Rivets
- Rivet Nuts / Threaded Inserts
- Hex Head Cap Screws
- Screws
- Lockbolts
- Binder Posts & Screws
- Burrs & Washers
- Clevis Pins
- Hairpin Cotters
- Cotter Pins
- Brass Escutcheon Pins
- Drive Screws
- Brass Eyelets
- Rivet Kits / Rivet Nut Kits
- Thread Repair Kits - Helical Inserts
- Cleco Fasteners/Temporary Rivets
- Keysert Inserts
- Key Sert Range Kits
- Vibratite Threadlockers, Adhesives, Sealants & More
- Vibratite VC-3 Threadmate
- Threadlocker
- Thread Sealant
- Anaerobic Retaining Compounds
- Anaerobic Liquid Gasketing
- Cyanoacrylates (SuperGlue)
- Anti-Seize Compounds
- Light Cure Adhesives
- Structural Adhesives
- Epoxies
- Primers, Accelerators & Activators
- Urethanes
- DriveGrip
- Pre-applied Fasteners
- Value Fastener Screws
Large Flat Head Solid Rivets (1/2" inch over diameter)
Jay Cee Sales & Rivet has a large in-stock supply of large solid round head rivets. Looking for round head or countersunk rivets? Use the links below for more information.
These Large Flat Head Solid Rivets are available in: STEEL, STAINLESS STEEL, BRASS, COPPER, MONEL, INCONEL
For Aluminum Head Styles, CLICK HERE
Flat Head Solid Rivet Specifications
| Nominal | D | A | H | |||||
|---|---|---|---|---|---|---|---|---|
| Body Diameter | Head Diameter | Head Height | ||||||
| Max | Min | Basic | Max | Min | Max | Min (Basic) | ||
| 1/2 | 0.500 | 0.520 | 0.478 | 0.875 | 0.938 | 0.844 | 0.281 | 0.250 |
| 5/8 | 0.625 | 0.655 | 0.600 | 1.094 | 1.157 | 1.063 | 0.344 | 0.313 |
| 3/4 | 0.750 | 0.780 | 0.725 | 1.312 | 1.390 | 1.281 | 0.406 | 0.375 |
| 7/8 | 0.875 | 0.905 | 0.850 | 1.531 | 1.609 | 1.500 | 0.469 | 0.438 |
| 1 | 1.000 | 1.030 | 0.975 | 1.750 | 1.828 | 1.719 | 0.531 | 0.500 |
| 1 1/8 | 1.125 | 1.160 | 1.098 | 1.969 | 2.063 | 1.938 | 0.610 | 0.563 |
| 1 1/4 | 1.250 | 1.285 | 1.223 | 2.188 | 2.282 | 2.157 | 0.672 | 0.625 |
| 1 3/8 | 1.375 | 1.415 | 1.345 | 2.406 | 2.500 | 2.375 | 0.735 | 0.688 |
Approximate proportions:
A - 1.75 x D
H - .500 x D
D = Basic diameter of rivet shank.Flat head rivets are not standard. Head dimensions can be modified or changed from those shown.
The above dimensions are furnished when no other size is specified.
Note: Not responsible for errors in data tables. Please check with our sales department to confirm specs.
Thanks for signing up!